Draytek Vigor 2600 VGST Manuel d'auto-installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'auto-installation pour {nom_de_la_catégorie} Draytek Vigor 2600 VGST. Draytek Vigor 2600 VGST 10 pages. Dsl router
Imprimer la page
2. Connect the unoccupied socket on the NT
equipment (in point 1) with the splitter port
labelled PHONE using the separate enclosed
cable (both connectors identical – RJ 11).
3. Proceed with the third bullet point of the
preceding procedure.
If your telephone socket is unsuitable (it has
a different connector – please see figure on
page 9) and the connecting cable cannot be
pulled out or your NT has a line–in jack that
cannot be plugged out, contact our Fault
Reporting Centre 12129.
Legend to an unsuitable NT:
1. power cord
2. cable – line-in jack (fixed)
3. ISDN-out jack
12
> Self-Installation Guide
Unsuitable NT
1.
2.
3.
Diagram of the Overall DSL Connection in the case
of an ISDN Line
Telephone socket
Enclosed separate
cable to splitter
DSL cable
– accessories to
the DSL router
DSL router
DrayTek Vigor 2600 VGST
Your NT (Network termination)
Splitter
230 V
Your telephone cable
Your ISDN
telephone set
> DSL router DrayTek Vigor 2600 VGST
13