Electrolux 300 Series Manuel d'instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Electrolux 300 Series. Electrolux 300 Series 50 pages. Front load dryer
Également pour Electrolux 300 Series : Manuel du propriétaire (11 pages), Manuel d'utilisation et d'entretien (39 pages), Manuel d'utilisation et d'entretien (28 pages), Manuel d'utilisation et d'entretien (46 pages)

Removing shipping hardware

IMPORTANT

Failure to remove shipping hardware completely could result in damage to the appli-

ance, damage to your home, or unexpected washing results.

Save all shipping bolts and spacers for future use. If the washer is to be transported at a

later date, the shipping hardware must be reinstalled to help prevent shipping damage

For 300 Series:

Remove all of the following:

4 BOLTS

4 SHIMS

4 BLACK SPACERS

3 P CLAMPS

NOTE

Rubber expansion material on spacers may need time to relax before they can be easily

pulled through shipping hole.

Unpacking Washer

P Clamps

For 400, 500, and 600 Series:

Remove all of the following:

5 BOLTS

5 SHIMS

4 BLACK SPACERS

4 P CLAMPS

1 WHITE SPACER

Installing hole plugs

Locate hole plugs in the small bag sup-

plied with washer instruction guides. Insert

them in the holes in the washer back panel

where the shipping hardware has been

removed.

Shipping Fork

(on select models)

White Spacer

(on select models)

Black Spacers

Shims

1 SHIPPING FORK

Bolts