Electrolux 300 Series Manuel d'utilisation et d'entretien - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux 300 Series. Electrolux 300 Series 46 pages. Front load dryer
Également pour Electrolux 300 Series : Manuel du propriétaire (11 pages), Manuel d'utilisation et d'entretien (39 pages), Manuel d'instructions d'installation (50 pages), Manuel d'utilisation et d'entretien (28 pages)

Imprimer la page
Electrolux 300 Series Manuel d'utilisation et d'entretien

Pre-Installation Requirements

Exhaust Venting

ˆ Free-flowing, clear of lint buildup
ˆ 4 inch (102 mm) rigid metal or
semi-rigid metal transition ducting
of minimal length and turns
ˆ NO foil or plastic venting material
ˆ Approved vent hood exhausted to
outdoors
Leveling
ˆ Dryer is level, side-to-side and front-
to-back
ˆ Cabinet is sitting solid on all corners
Gas Supply (Gas Dryer)
ˆ Manual shutoff valve present in
Tools and materials needed for installation:
supply
ˆ All connections sealed with approved
sealer and wrench tight
ˆ Conversion kit for LP GAS system
ˆ Gas supply turned on
ˆ No leaks present at all connections
- check with soapy water, NEVER
check with flame
Water Hookup (Select Models)
ˆ Inspect hoses for proper placement
of rubber washers
ˆ Water supply is turned on
ˆ Check for leaks
ˆ Steam model dryers require use of
ASSEMBLY HOSE KIT #5304495002
(not included) and must be
purchased separately.

Installation Checklist

240v Electric Supply

(Electric Dryer)

ˆ Approved NEMA 10-30 or 14-30
service cord with all screws tight on
terminal block
ˆ Approved strain relief installed
ˆ Terminal access cover installed
before initial operation

Door Reversal

ˆ Follow detailed instructions in this
guide
ˆ Test hinge and latch for function

Electrical Power

ˆ House power turned on
ˆ Dryer plugged in
Final Checks
ˆ Installation Instructions and Use &
Care Guide read thoroughly
ˆ Door latches and drum tumbles
when cycle starts
ˆ Registration card sent in
9