Electrolux 500 TimeCare EW6T3226B3 Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux 500 TimeCare EW6T3226B3. Electrolux 500 TimeCare EW6T3226B3 32 pages.
Imprimer la pagewashing results in the minimum possible
time
The SensiCare System is
not available with all
programmes such as : Wool/
Silk, Rapid 14min and
programmes with short
cycles.
11.7 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
11.8 Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
11.9 Opening the lid
While a programme or the delay start
operates, the appliance lid is locked. The
indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the lid.
Open the lid during the first 10
minutes of the cycle and when the
delay start operates:
1. Press the
to pause the appliance.
2. Wait until the lid lock indicator
goes off.
3. You can open the lid.
4. Close the lid and press the
The programme (or the delay start)
continues.
Open the lid when the programme
operates:
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance lid.
3. Close the lid and set the programme
again.
11.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• The indicator of the button
off.
• The lid lock indicator
• The indicator
• You can open the lid.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
• Keep the lid ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent
the creases in the laundry.
• The lid lock indicator
indicator
flashes. The lid stays
locked.
• You must drain the water to open the
lid.
To drain the water:
1. If necessary, decrease the spin
speed. If you set
only drains.
ENGLISH
19
again.
goes
goes off.
is on.
is on. The
, the appliance