Electrolux EIFLS60JIW Manuel d'utilisation et d'entretien - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux EIFLS60JIW. Electrolux EIFLS60JIW 30 pages. Laveuse à chargement frontal iq-touch
Également pour Electrolux EIFLS60JIW : Spécifications des produits (2 pages), (espagnol) Guide d'utilisation et d'entretien (34 pages), (French) Manual D’utilisation Et D’entretien (32 pages)
Imprimer la page
Solutions to Common Problems
28
Service Prevention Checklist
Before calling for service, review this list. It may save both time and expense. The list includes common
occurrences that are not the result of defective workmanship or materials in this washer.
OCCURRENCE
NOISE
High pitch "jet engine"
noise.
Rattling and clanking
noise.
Thumping sound.
Vibrating noise.
OPERATING
Washer does not start.
Washer won't spin.
Residue left in drum.
LCD displays
Door hesitates to open
after pressing Touch-2-
Open latch.
POSSIBLE CAUSE
A certain amount of motor whine is nor-
mal during the spin cycle.
Foreign objects such as coins or safety
pins may be in drum or pump.
Belt buckles and metal fasteners are hit-
ting wash drum.
Heavy wash loads may produce a
thumping sound. This is usually normal. If
sound continues, washer is probably out
of balance.
Washer is not resting fi rmly on fl oor.
Shipping bolts and foam block have not
been removed during installation.
Wash load unevenly distributed in drum.
Electrical power cord may not be plugged
in or connection may be loose.
House fuse blown, circuit breaker
tripped, or a power outage has occurred.
Water supply faucets are not turned on.
Motor is overheated. Washer motor will
stop if it becomes overheated.
Washer door is not completely closed.
Load is too small.
Heavily soiled items.
DEMO MODE
.
Washer has been programmed to tempo-
rarily perform a repeating demo cycle.
Water on bellows may have dried, leaving
residue on door glass during extended
non-use or vacation.
SOLUTION
Stop washer and check drum. If noise continues after
washer is restarted, objects may be in pump. Call your
authorized servicer.
To prevent unnecessary noise and damage to drum,
fasten fasteners and turn items inside out.
Stop washer and redistribute wash load.
Move washer so it rests fi rmly on fl oor. Adjust leveling
legs. See INSTALLATION INSTRUCTIONS for details.
See INSTALLATION INSTRUCTIONS for removing ship-
ping bolts and foam block.
Stop washer and rearrange wash load.
Make sure plug fi ts tightly in wall outlet.
Reset circuit breaker or replace fuse. Do not increase
fuse capacity. If problem is a circuit overload, have
it corrected by a qualifi ed electrician. If problem is a
power outage, call local electric company.
Turn on water supply faucets.
It will automatically restart after a cool down period
of up to 30 minutes (if washer has not been manually
turned off).
Close door completely.
Add 1 or 2 similar items to help balance the load.
Wipe drum with a nonabrasive household cleanser, then
rinse. Shake or brush excess dirt and sand from items
before washing
To return to the factory default settings, select RESET
in set prefs under the options scroll buttons.
Clean residue from door glass and wipe front of bellows
opening with warm water and soap.
If issue persists, wipe front of bellows opening with
Lemon Pledge
®
spray or wipes.