Bosch HBC26D553 SERIES Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bosch HBC26D553 SERIES. Bosch HBC26D553 SERIES 28 pages.
Imprimer la page
Accessories
Cooking container, solid, GN
deep
Cooking container, perforated, GN
40 mm deep
Wire rack
Cleaning sponge
Descaler
Honeycomb microfibre cloth
Automatic calibration
The boiling temperature of water depends on the air pressure.
During calibration, the appliance is adapted to the pressure
conditions in the location where it is installed. This happens
automatically when you first use the appliance (see section:
First use). More steam develops than usual.
Before using the appliance for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
Setting the clock and language
■
Setting the water hardness range
■
Starting the appliance for the first time
■
cleaning the accessories before use
■
Setting the clock and language
Once your new appliance has been connected to the mains,
"Set clock" appears in the display. Set the clock and the
language for the display, if required.
8KU]HLW HLQVWHOOHQ
2EHU8QWHUKLW]H
8KU]HLW
&
PLW VFKOLHHQ
Press the
X
button to switch to the preset time.
1.
Set the current time using the rotary selector.
2.
Press the
button to switch back to "Clock".
Y
3.
Switch to "Select language" using the rotary selector.
4.
Switch to "English" using the
5.
Set the required language using the rotary selector.
6.
There is a choice of 30 different languages.
Press the
0
button.
7.
The time and language are applied. The current time is
displayed.
Setting the water hardness range
Descale your appliance regularly. This is the only way to
prevent damage.
Your appliance automatically displays when it needs descaling.
It has been preset to water hardness range "medium". Change
the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
If your water is very hard, we recommend that you use softened
water.
6
Order no.
HEZ36D153
, 40 mm
Y
HEZ36D153G
,
Y
HEZ36DR
643 254
311 138
460 770
X
button.
It is important that the appliance steams without interruption for
20 minutes at 100 °C. Do not open the appliance door during
this time.
If the appliance was not able to calibrate itself automatically (for
example, because the appliance door was opened), the
calibration process is carried out again during the next cooking
operation.
After moving house
So that the appliance automatically adjusts itself to its new
location, you must reset the appliance to the factory settings
(see section: Basic settings) and repeat the initial start-up
process (see section: First use).
After a power cut
The appliance saves the calibration settings even in the event
of a power cut or disconnection from the mains. Recalibration
is not necessary.
You can only dispense with descaling completely if you
exclusively use softened water. If this is the case, change the
water hardness to "softened".
You can change the water hardness range in the basic settings
when the appliance is switched off.
If required, press the
%
1.
Press and hold the
button until "Select language" appears in
°
2.
the display.
Turn the rotary selector until "Water hardness range" appears.
3.
Press the
X
button.
4.
"2-medium" is highlighted in the display.
Change the water hardness range using the rotary selector.
5.
Possible values:
softened
1-soft
2-medium
3-hard
4very hard
Press the
button to exit the basic settings.
°
6.
The change is saved.
Before first use
Before using the appliance for the first time, heat it up while still
empty in the "Steam" type of heating to 100 °C for 20 minutes.
Do not open the appliance door during this time. The appliance
is automatically calibrated (see section: Automatic calibration).
Press the
%
button to switch on the appliance.
1.
After approx. 4 seconds, the "Steam" type of heating
appears.
Fill and insert the water tank (see section: Filling the water
2.
tank).
Before using for the first time, moisten the seal in the tank
cover with a little water.
button to switch off the appliance.
-
I
II
III
IV