Bdcom S1216 Manuel d'instruction du matériel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction du matériel pour {nom_de_la_catégorie} Bdcom S1216. Bdcom S1216 19 pages.

Chapter 2 Preparing for installation

The following discusses the considering cases of switch installation, includes two

sections:

Please continre to read "switch Installation" after reading this section.

2.1.1

(1)

Keep the chassis areas clear and dust-free during and after installation；

(2)

Put the cover in a safe place;

(3)

Put the tools away from walk areas where you and others could fall over them；

(4)

Do not wear loose clothing that could get caught in the chassis. Fasten your tie

or scarf and roll up your sleeves.

(5)

If the working environment could cause damage to your eyes, wear protection

glasses;

(6)

Do not do anything that causes damage to human or device.

2.1.2

Please follow the instructions below. Any mal-operation could cause damage to

human;

(1)

Read the installing instruction carefully before operating the system;

(2)

Only qualified mechanics are allowed to install or replace the switch;

(3)

Before working on a chassis or working near power supplies,unplug the power

cord on AC units;disconnect the power at the circuit breaker on DC units.

(4)

Unplug AC plug and disconnect DC connection before working on the case or

near the power supply.

(5)

Ultimate configuration of this product must follow all applicable national laws

and regulations.

2.1.3

Follow these guidelines when working on equipment powered by electricity.

BDCOM S2116 Switch Hardware Installation Guide

- 4 -