Bosch HBC36D7.4 Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bosch HBC36D7.4. Bosch HBC36D7.4 36 pages. Combination steam oven
Également pour Bosch HBC36D7.4 : Manuel d'instruction (36 pages)

Bosch HBC36D7.4 Manuel d'instruction

Switching on the appliance

:
Risk of scalding!
When you open the appliance door and remove the cooking
containers, hot liquids may squirt out because the cooking
containers may have warped. When opening, do not stand too
close to the appliance. Open the appliance door carefully.
Remove the cooking container carefully. Keep children at a
safe distance.
Note: Always use the cooking container and wire rack in their
standard position (not the other way up).
Press the
button to switch on the appliance.
%
1.
The button description appears in the display for
approximately 4 seconds. The display then switches
automatically to the "Types of heating" menu.
Or press the
å
button to go directly to the "Types of heating"
menu.
Turn the rotary selector to set the desired type of heating.
2.
Press the
X
button.
3.
The default temperature is highlighted.
Turn the rotary selector to set the desired temperature.
4.
Type of heating
Temperature range Default cooking
Hot air
30 - 230 °C
Steam
35 - 100 °C
Combination
120 - 230 °C
Reheat
100 - 180 °C
Prove
35 - 50 °C
Defrost
35 - 60 °C
Slow cooking
60 - 120 °C
Plate warming
30 - 70 °C
Keep warm
60 - 100 °C
For types of heating involving steam, you must now set a
cooking time (see also section: Time-setting options).
Press the
button.
0
5.
The default cooking time is highlighted.
Turn the rotary selector to set the required cooking time.
6.
Press the
button to start the cooking operation.
n
7.
The appliance heats up.
For the Steam type of heating, the cooking time only starts
counting down after the heating-up time is complete.
"Fill water tank?" message
This message appears if you set a type of heating and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Current temperature
Press the
°
button.
The current temperature is displayed for 3 seconds.
Changing the temperature
You can change the temperature at any time.
1.
2.
Pause
Briefly press the
cooling fan may continue to run. Press the
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the
to restart.
If you have set the basic setting "Continue operation after
closing door" to "automatic", restarting is not required (see
section: Basic settings).
"Fill water tank" message
If the water tank is empty, a signal sounds. "Fill water tank"
appears in the display. Cooking is paused.
1.
2.
3.

Switching off the appliance

:
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the
cooking time, cooking is ended automatically. A signal sounds.
time
Press the
-
The cooling fan may continue running when you open the
20 minutes
appliance door.
30 minutes

After each use

10 minutes
30 minutes
Emptying the water tank.
30 minutes
1.
-
-
2.
-
3.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
:
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1.
2.
3.
4.
Press the
X
or
Y
button until the temperature is
highlighted.
Change the temperature using the rotary selector.
The change is adopted automatically.
button to interrupt cooking (pause). The
n
Open the appliance door carefully.
Hot steam will escape.
Take out the water tank, fill to the "max" mark and reinsert.
Press the
button.
n
Risk of scalding!
button to end cooking. If you have set a
n
button to switch off the appliance.
%
Open the appliance door carefully.
Hot steam will escape.
Remove and clean the water tank.
Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Risk of scalding!
Leave the appliance door ajar until the appliance has cooled
down.
Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
Remove food residues from the cooking compartment as
soon as the appliance has cooled. Burnt-on remains will be
much harder to remove later.
Wipe kitchen units or handles if condensation has formed on
them.
n
button to start.
button
n
11