Bdcom S2528GX Manuel d'installation du matériel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Bdcom S2528GX. Bdcom S2528GX 20 pages.

Chapter 2 Installation Preparation

Similar to other electronic products, the semiconductor chip easily gets damaged if you

power on and off abruptly and frequently. To restart up the switch of S2528GX, you

have to open the power on-off three or five seconds after the power is cut off.

Avoid severe collision or falling down from the height to protect the parts in the switch.

Use correct lining ports to connect S2528GX outside. Do not insert the Ethernet plug

into the console port (RJ45 8-line socket). Similarly, do not insert the console cable into

the console port (RJ45 8-line socket).

Note:

1) When you plug or dial out the power line, keep the power line horizontal with the

power socket.

2) When the lifetime of our products ends, handle them according to national laws

and regulations, or send these products to our company for collective processing.

2.2.1



Keep dustless and clean during or after the installation.



Put the chassis at the safe place.



Put tools at the right place where they are not easily falling down.



Put on relatively tight clothes, fasten the tie or scarf well and roll up the sleeve,

avoiding stumbling the chassis.



Put on the protective glasses if the environment may cause damage to your

eyes.



Avoid incorrect operations that may cause damage to human or devices.

2.2.2

The safety notices mentioned here means that improper operation may lead to body

damage.



Read the installation guide carefully before you operate the system.



Only professionals are allowed to install or replace the switch.

S2528GX Hardware Installation Manual

- 4 -