Electrolux ELAY10DGAW8 Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Electrolux ELAY10DGAW8. Electrolux ELAY10DGAW8 31 pages.

www.electrolux.com

Cold

water tap

Precautions when connecting

the water supply hoses

If there is only one water tap in the place

where you want to install your washing

machine, make sure that this is a cold

water supply and connect it to the intake

marked COLD, otherwise your washing

machine will indicate that there is a fault

and will not work, since your washing

machine only uses cold water for rinsing.

NOTE 1: "With regard to equipment

connected to the water supply using

removable hoses, the new hoses supplied

with the equipment must be used.

Used hoses must not be used".

Cold

water

inlet

Only one plug

must be used for

the connection.

Hot

water

inlet

NOTE 2: Your washing machine has a red

stopper indicating the hot water intake.

This stopper must be removed when you

connect the hot water hose and if this

option is not being used then the stopper

should be left in place.

Preparations

Electrical connection

The washing machine must be earthed, so

make sure that the plug has three prongs

because otherwise you might experience

an electric shock if there is no insulation.

For the same reason DO NOT USE

extension leads with 2 conductors.

multiple connections

with your washing

machine.

Hot water tap