Electrolux ENV06 Manuel d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Electrolux ENV06. Electrolux ENV06 48 pages.
Imprimer la page3 SERIES 8
3.1
GENERAL CHARACTERISTICS
The ENV060 electronic control system consists of
two electronic boards. One integrates the power and
control functions and the selector, the other the
display function, where also the LCD display is
connected.
The PCB is mounted on a casing fitted to the control
panel.
Version
SERIES 8
Number of buttons
Number of LEDs
Programme selector
Serial port
Power supply
Type of washing
Rinsing system
Motor
Spin speed
Anti-unbalancing system
Water fill
Detergent drawer
Control of water level in the tub
Door safety device
Power of heating element
Temperature control
Buzzer
Sensors
SOI/DT 2007-10 dmm
Max. 7 (1 options + start/pause)
Max. 2 + LCD
21 positions with main switch (incorporated in the PCB )
DAAS-EAP communications protocol up to 115.200 baud
220/240V
50/60 Hz (configurable)
Jet-system
Jet-system
Two-pole asynchronous, with three-phase tachometric generator (with
Inverter)
1200 ÷ 1600 rpm
FUCS
1 solenoid valve with 1 inlet – 2/3 outlets
4 compartments: prewash, wash, conditioners, (stains)
Electronic/analogue pressure switch
Traditional (with PTC)
Instantaneous
1950W with thermal fuses incorporated
NTC sensor incorporated in the heater
Traditional incorporated in the electronic board
Water fill gauge (flowmeter)
Aqua control
5/48
599 70 27-90