Electrolux EW 1026F Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Electrolux EW 1026F. Electrolux EW 1026F 14 pages.

Imprimer la page

INSTALLATION

Transit devices

All transit bolts and packing must be removed before

using the appliance.

Proceed as follows:

Using a spanner,

un-

screw and remove the

rear right-hand bolt and

lay the machine on its

back, taking care not to

squash the hoses. This

can be avoided by plac-

ing one

of the corner

packing pieces between

the machine

and

the

Remove the polystyrene blocks from the underside of

the machine and release the two plastic bags by

removing the adhesive strip.

Carefully remove the right-hand bag (1) then the left-

hand bag (2) by pulling them towards the centre of the

_machine.

Set the machine upright and remove the two remain-

ing bolts from the back.

Pull out the three plastic pegs from the holes into

which the bolts were fitted.

Plug the open holes with the plugs which you will find

at the back of the appliance.

Note: You are advised to keep all transit devices so

that they can be refitted if the machine ever has to be

transported again.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine i

not impeded by carpets, rugs etc. Check that ing

machine does not touch the wall or other kitche

units.

Carefully level by screwing the adjustable feet in o|

out. Never place cardboard, wood or similar material

under the machine to compensate for any uneven}

ness in the floor.

After having levelled the machine, tighten the lock

nuts.

Water inlet

Connect the water inlet hose to a tap with a 3/4]

thread after having inserted the small filter "A" sup}

plied with the machine.

The inlet hose must not be lengthened. If it is too sho

and you do not wish to move the tap, you will have "

purchase a new, longer hose specially designed fo

this type of use.

The other end of the inlet hose which connects to a

machine can be turned in any direction. Simply loose!

the fitting, rotate the hose and retighten the fitting

making sure there are no water leaks.

wal