Electrolux EW 1042 S Livret d'instructions - Page 10

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Electrolux EW 1042 S. Electrolux EW 1042 S 22 pages.

Imprimer la page

1 Programme card

A programme card in English is supplied with

the instruction booklet. It can be inserted in the

detergent dispenser drawer.

2 ON/OFF button

Press this button to start the machine, press it

again to stop a programme or to switch off the

machine.

3 Spin reduction button

By depressing this button the spin speed is

reduced as follows:

- Programmes for cotton and linen: from

1000 to 650 rpm;

- programmes for synthetics, delicates,

wool and programme M: from 650 to

450 rpm.

4 Anti-crease button

Press this button with the washing programmes

for synthetic or delicate fabrics in order to block

the water drainage of the last rinse. This avoids

creasing when the laundry is left inside the

machine at the end of the washing. To empty the

machine, simply depress the button again (the

water will be drained and the clothes will be

gently spun) or select programme "L" (drain).

5 Economy button E

For normally soiled laundry you can select

programme A 40°-60°C (cotton & linen) and

programme F 30°-40°C (synthetics) by

depressing button E.

The reduction in temperature will save energy.

Equally good results will be obtained because

the reduced temperature is compensated by

maintaining the full washing time.

C0057S

6 Door open button

Press this button to open the door.

7 Door locked light

This light comes on at the start of the prgramme

indicating that the door is locked. The door

cannot be opened until the light has gone out.

To open the door during operation, the machine

must be switched off. When the light goes out,

the door can be opened taking into account the

level of the water in the machine.

8 Temperature selector dial

Turn the dial clockwise or anti-clockwise to the

required position.

It is also possible to perform a cold wash by

turning the dial to the

9 Programme selector dial

To select the required programme turn this dial

clockwise.

10 Operating pilot light

This light comes on when the programme starts

and goes out when the ON/OFF button is

released.

symbol.