Electrolux EW 660F Livret d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Electrolux EW 660F. Electrolux EW 660F 20 pages. Electrolux washing machine instruction booklet
Également pour Electrolux EW 660F : Livret d'instructions (20 pages), Livret d'instructions (20 pages)

Imprimer la page

Installation

Unpacking

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all transit devices so that they

can be refitted if the machine ever has to be transported

again.

1. Using a spanner, unscrew and remove the two

rear bottom screws. Slide out the two plastic pins.

Lay the machine on its back, taking care not to

squash the hoses. This can be avoided by placing

one of the corner packing pieces between the

machine and the floor

2. Remove the polystyrene block(s) from the bottom

of the machine and release the two plastic bags.

3. Very carefully slide out the left polythene bag,

removing it towards the right and then

downwards.

4. Very carefully slide out the right polythene bag,

removing it towards the left and then upwards.

Remove the bottom cover placed into the drum of

your appliance, lay it's hook as the arrow 'A'

indicates and push the top of the cover to seal it

closed

Important: You can find more detailed instructions

regarding the bottom cover assembling in it's relative

bag.

5. Set the machine upright and remove the

remaining rear screw. Slide out the relevant pin.

6. Plug all the holes with the plugs which you will

find in the envelope containing the instruction

manual.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine

is not impeded by carpets, rugs etc. Check that

the machine does not touch the wall or cupboard

units. Carefully level by screwing the adjustable

feet in or out. Never place cardboard, wood or

similar materials under the machine to

compensate for any unevenness in the floor.

Water inlet

Connect the water inlet hose to a tap with 3/4" BSP

thread.

Use the hose supplied with the washing machine.

DO NOT USE OLD HOSES.

The other end of the inlet hose which connects to the

machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks.