Electrolux EW 770 F Livret d'instructions - Page 9

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Electrolux EW 770 F. Electrolux EW 770 F 21 pages.
Également pour Electrolux EW 770 F : Livret d'instructions (21 pages)

Electrolux EW 770 F Livret d'instructions
The maximum speeds are:
for cotton, synthetics, hand wash and wool:
750 r.p.m. for Model EW 770 F and 850 r.p.m. for
Model EW 880 F
for delicate fabrics: 650 r.p.m.
7 Programme display
When you select the programme, the light
corresponding to the selected speed or the various
phases making up the programme come on.
Spin speed lights: are on during the washing
programme and remain alight at the end of the cycle.
EW 770 F
in Progress: when this light comes on this means
that the machine is performing the washing
programme. If you have selected the "Prewash"
function, this light will be on during the prewash
phase too. If you have selected the "Rinse Hold "
function, this light will be on during washing.
End: when the programme has finished, the "End"
pilot light comes on.
The "End" light flashes in the event of operating
problems :
4 flashes: door open
2 flashes: problem with water draining
1 flash: problem with water supply
For more information see paragraph "Something not
working"?
Door: the "Door" pilot light indicates if the door can
be opened:
- light on: the door cannot be opened
- light off: the door can be opened
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 14)
EW 880 F
8 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Hand wash / Delicate
• Wool
• Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme and position
At the end of the programme the selector dial
must be turned to position "O" to switch the
machine off.
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
9
to "cold wash".