Alemlube 5080A Manuel du propriétaire

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alemlube 5080A. Alemlube 5080A 2 pages. Refueling drum pump with filter

Imprimer la page

Description

Model 5080A is a high volume, manually operated rotary action drum pump that delivers up to 100 litres per minute. It is

designed for refuelling of both on and off road vehicles and large machinery. The simple design of the 5080A allows

easy servicing if required. The pump comes complete with delivery hose and includes a replaceable filter.

*PLEASE NOTE, OIL GEARS BEFORE USE. (SAE 30 oil is recommended for this purpose).

Specifications

Uses

Discharge Quantity

Materials

Weight

Size

Operating Instructions

1 Oil Gears Before Use

Before using model 5080A high volume rotary refuelling pump, make

sure that you fill the gear cover with oil. Fill with SAE 30 oil or equivalent

to the reference line through the lubrication bolt hole (as indicated on the

diagram). Inspect & top up periodically as required.

2 Revolution Direction

The handle turns in a clockwise direction and the pump discharges one

litre per one revolution of the handle.

3 Filter

A filter of #60 mesh polyethylene net is standard on the pump and it is

located at the bottom of the suction pipe. Rotating the handle and

therefore operating the pump may become harder if the filter is clogged

with other similar impurities that have been filtered out of the fuel or low

viscosity oil. Remove the filter periodically and clean with kerosene.

4 Cautions

Suitable liquids include most low viscosity liquids such as unleaded

petrol, kerosene and low viscosity oils. Although the pump can be used to

pump other liquids of high viscosity, the pump becomes harder to operate

and doing so will shorten the life of the pump & may void warranty.

Do not use this pump for any solvent or chemical transfer as these fluids

will dissolve the Buna N gaskets, etc. ( Use the 301-A, 401-A, 733, or 933

for stronger solvents).

Please note when pumping fuels like kerosene, petrol or diesel, these

products tend to "dry out" the internals of the pump causing parts "to

stick" and the pump not to prime and dispense. To stop this from

happening and to increase the working life of your pump, we recommend

you lubricate the vanes of the pump by dropping a few drops of oil into

the pump body by taking off downtube (2000-42) & lubricating at this

opening. Rotate the handle a few times.

Do not pump fluids containing dirt or particles such as waste oil.

Contaminated fluids may block the filter, preventing discharge, & may

damage the pump interior or cause other problems.

NSW

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3889 8480

FAX: (02) 9939 0411

FAX: (07) 3889 8490

Visit our website at

OWNER'S MANUAL

Refuelling Drum Pump with Filter

Diesel fuel, petrol, kerosene and low viscosity oils up to SAE 30

1 litre per rotation / 100 litres per minute

Cast Aluminium, Buna N Seals

7.0kgs

Suction pipe: 32mm ID x 1m Delivery hose: 25mmID x 2.2m

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

www.alemlube.com.au

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

Email - [email protected]

5080A

TEL: (09) 447 1007

FAX: (09) 447 1008