Carl's Place Pro Enclosure Kit Instructions d'assemblage et manuel d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et manuel d'utilisation pour {nom_de_la_catégorie} Carl's Place Pro Enclosure Kit. Carl's Place Pro Enclosure Kit 20 pages.
Également pour Carl's Place Pro Enclosure Kit : Instructions d'assemblage et manuel d'utilisation (17 pages), Instructions d'assemblage et manuel d'utilisation (20 pages)

Attach the Impact Screen

Orient the impact screen with the hook-and-loop strips facing the inside and

front of the enclosure.

1. Prepare by inserting additional ball

bungees through the screen

grommets with the balls on the back

of the screen.

2. Attach the impact screen to the

frame, beginning with two ball

bungees (one connecting in each

direction) in each of the top two

corners.

3. Secure the bottom two corners.

4. Make any adjustments needed to center the screen.

5. Secure each bungee around the frame, alternating from corner to corner to

keep the screen centered in the frame.

Remember the block

of wood you used to

slide the sleeve on

the pipe?

It comes in handy

here when wrapping

the bungees around

the bottom pipe.

Your Carl's Place impact screen is designed so that you can remove or add

bungees to adjust the tension for bounceback. Check out the Tips and Tricks in

the back of this manual for more info.

Page | 16