ADVANCED FLOORTECH AF-X1 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ADVANCED FLOORTECH AF-X1. ADVANCED FLOORTECH AF-X1 13 pages. Floor scrubber

Imprimer la page

AF-X1

2.0 Safety requirements for batteries

●It is necessary to avoid the battery being in a low voltage state, and it should be

charged as soon as possible.

●To avoid leakage of electricity, please keep the battery dry and clean, especially to

remove contaminants such as metal dust.

●It is forbidden to put metal parts (such as tools) on the battery to prevent the battery

from being short-circuited and burnt out.

●The charging room should be well ventilated.

●Do not connect or remove the battery when the key switch is in the ON position.

●Before removing or installing batteries, first disconnect the negative (-) battery wire, and

then disconnect the positive (+) battery wire. When rewiring, be sure to pay attention to

the polarity of the battery, as wrong connection will damage electrical components.

●Avoid direct contact between the positive electrode and the negative electrode,

because it will cause a large current short circuit, generate high heat and even cause a

fire.

Warning: When the machine is not used for a long time or the machine is repaired, the

battery connection wire needs to be disconnected!