Drayton 22083 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Drayton 22083. Drayton 22083 13 pages. Programmable room thermostat 5-2 day / 7 day
Également pour Drayton 22083 : Manuel de démarrage rapide (2 pages)

Imprimer la page

Once you have selected the required day or days, press > to

view the existing time/temperature event (1). (Fig 14) time will

flash. Press > again to view the temperature setting, temperature

will flash. Press > again to view the second time temperature

event (Fig 14a).

(Fig 14)

(Fig 14a)

When you get to the event you wish to change press + or - to

change the required time, then Press > to accept. Use + or - to

select the required temperature, then > to accept. Digistat+3

will now show the next time/temperature event. To exit press <

or > until you return to Auto mode. If you continue to press > it

will display all the time/temperature events and move to the

next day, finally going to auto.

How to change User Options.

If you wish to change any user options 1 to 8 shown in table 1

they can be accessed from Auto or Man by pressing < and >

simultaneously for 3 seconds. Once you have accessed the user

setting Menu (Fig 15) press > to scroll through selectable

options 1 to 8. The settings for each option can be changed by

pressing + or - as required. Press > to accept the change and

move to the next option. To exit press < and > simultaeously for

3 seconds. Alternatively, not pressing any buttons for 2 mins will

cause the Digistat+3 to return to Auto. (Fig 15a) shows option 1

24 (24 hour clock).

Only selected options which have been accepted by pressing >

will be changed.

(Fig 15)

(Fig 15a)