Drazice NADO 500/200v7 Manuel d'utilisation et d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice NADO 500/200v7. Drazice NADO 500/200v7 6 pages. Storage tanks
Également pour Drazice NADO 500/200v7 : Manuel d'utilisation et d'installation (6 pages), Manuel d'installation (10 pages)
Imprimer la page
3. General dimensions
Storage tank capacity (l)
Inner vessel capacity (l)
Storage tank weight (kg)
Storage tank diameter
Diameter of storage tank with insulation
Heating surface of the exchanger (m
Maximum tank pressure (MPa)
Maximum pressure of the inner vessel (MPa)
Maximum pressure of exchanger (MPa)
Maximum temperature of water in the tank and
exchanger (°C)
Maximum output of electrical heating element of
TJ 6/4" series (kW)
Standing loss (W)
Recommendation
It is recommended to use the product in an indoor environment with air temperatures from +5°C to
45°C and a maximum relative humidity up to 80%.
Connection of the inner vessel to HSW must comply with ČSN 060830, a safety valve has to be fitted
on the cold water inlet.
We recommend checking and cleaning the inner vessel from scale and eventual replacement of the
anode rod after two years of operation. The anode life is theoretically calculated for two years of
operation; however, it changes with water hardness and chemical composition in the place of use.
Prior to commissioning, we recommend that you run the heating circuit and any impurities
that are trapped in the filter clean, then the system is fully operational.
1. Technical description
NADO
500/200 v7
500
200
166
600
800
2
)
2,5
0.3
0.6
1
90
-
76/128
3
NADO
NADO
750/200 v7
1000/200v7
750
1000
200
200
214
228
790
790
990
990
3,3
3,3
0.3
0.3
0.6
0.6
1
1
90
90
2x6
2x6
113/150
126/178