Alen T300 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alen T300. Alen T300 12 pages. Alen t100: user guide
Également pour Alen T300 : Manuel de l'utilisateur (14 pages), Manuel de l'utilisateur (12 pages)

Imprimer la page

fully in the outlet, reverse the plug. If it still does not fit, contact qualified personnel to

install the proper outlet. Do not alter the plug in any way.

USiNg yoUR AiR PURifiER

Operating Your Unit:

Plug your air purifier into a grounded outlet.

Press POWER to start the air purifier. When your unit is on the control panel screen will

light up. To stop the air purifier press POWER and the screen will turn off.

Press SPEED and watch the indicator lights until desired fan speed is achieved.

Press TIMER to have the air purifier automatically turn off in a set amount of hours. Up to

twelve hours.

Select ION to activate the ozone safe built-in ionizer. Activation of the IONIZER can en-

hance your unit's ability to remove airborne particles (similar to the way dust is attracted

to a TV screen) and keep the air fresh. Press ION again to turn off.

Filter replacement indicator – Light bar will progressively illuminate as filter collects par-

ticles. There are two green, two yellow and one red bar. Each bar represents approxi-

mately one month of continuous operation. Once all five bars are fully illuminated (red

being the last), it is time to change the filter.

After changing the filter, RESET the filter indicator by holding down RESET while the unit

is ON until the illuminated bars disappear. To reach the button, use a pin or extended

paperclip.

Press UV to activate the built-in ultraviolet light. Press UV again to turn off.

Fan Speed

Level 1

Level 2

Level 3

Level 4

Result

Quietest operation

Basic cleaning power

Moderate cleaning power

Maximum cleaning power