Drazice OKHE ONE/E100 Manuel d'utilisation et d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice OKHE ONE/E100. Drazice OKHE ONE/E100 19 pages. Flat tank-type water heater for vertical mounting

Imprimer la page

Mount the water heater in vertical position. The fixing wood screws must have guaranteed

spacing t=180 mm and spacing F according to the heater volume (Figure 3)

2 upper hinges are attached to the wall and 2 lower hinges are fitted into the bottom holes on

the heater, the lower hinges serve as abutment

package.

Figure 3

OKHE ONE/E 30

OKHE ONE/E 50

OKHE ONE/E 80

OKHE ONE/E 100

OKHE ONE/E 120

The ONE heater can also be installed in a horizontal position. Considering the laws of physics,

its energetic performance drop will always occur due to deteriorated stratification of water.

However, neither lifecycle nor terms of warranty are changed thereby. Our heaters are tested

for operation in the horizontal position. In use in the horizontal position it is recommended that

the user set a temperature higher on the thermostat than factory optimum value.

Recommended value is 65 °C.

Direction of placement - to the left due to the fact the heating flange must be placed in a lowered

reservoir.

When installing in a horizontal position, only two bolts may be used for hanging (upper holes).

(Figure

350

560

750

950

1150

or with hinges.

4).

Hinges (4 pcs) are included in

Figure 4

- 9 -