Drazice TO-20 Manuel d'utilisation et d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice TO-20. Drazice TO-20 8 pages. Electric accumulation water heater
Également pour Drazice TO-20 : Manuel d'utilisation et d'installation (14 pages)
Imprimer la page
and shower inserts pursuant to ČSN 332000-7-701, the appliance is provided with a grounding terminal for connecting
with a yellow-green protective conductor on minimum section 4 mm
Access to the electric part of the heater is enabled only upon disconnecting the heater from power supply and
unscrewing the guard of the heater.
The degree of protection of electric parts of the heater is IP 45.
Respect rules of protection against electrical injuries in accordance with ČSN 33 2000-4-41.
10.
PUTTING THE HEATER INTO OPERATION
Once connected to the water and power supply, the heater can be put in service.
Procedure:
a) check the wiring and water supply;
check correct position of the thermostat sensors, they have to be inserted all the way. The sensors must be inserted all the
way in; first the operating and then the safety thermostat.
b) open the hot water valve on the combination faucet;
c) open the cold water inlet valve to the heater.
d) As soon as the water starts running through the hot water valve, the heater is filled and the valve closes.
e) Prior to putting the heater into operation, screw on the front heater guard which closes the access to the electric
compartment of the heater.
f) Turn on electricity using the front-end main switch which will activate the heater.
11.
IMPORTANT NOTICES
-
Without a confirmation of performed electrical and plumbing fixture issued by an authorised company the
warranty certificate shall be void.
-
You have to apply for approval of a local power supplier to connect the heater.
-
All hot water outlets must be provided with a combination faucet.
-
It is not allowed to handle the thermostat in any manner whatsoever, aside from temperature resetting with a
control button.
-
All electric installation handling, setting, and regulation feature exchange, may only be implemented by an
authorised service company.
The thermal fuse must not be turned off. In case of thermostat defect, the thermal fuse interrupts electric power
input to the heating element if the water temperature in the heater exceeds 99°C.
Disposal of packaging material and functionless product
A service fee for providing return and recovery of packaging material
has been paid for the packaging in which the water heater was
delivered
was paid pursuant to Act No. 477/2001 Coll., as amended, at EKO-
KOM a.s. The client number of the company is F06020274. Take the
water boiler packages to a waste disposal place determined by the
town. When the operation terminates, disassemble and transport the
discarded and unserviceable heater to a waste recycling centre
(collecting yard), or contact the manufacturer.
2
.
5