Drazice OKC 125 NTR Manuel d'utilisation et d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice OKC 125 NTR. Drazice OKC 125 NTR 20 pages. Tank-type water heaters for vertical mounting
Également pour Drazice OKC 125 NTR : Manuel d'utilisation et d'installation (17 pages), Manuel d'utilisation et d'installation (12 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (18 pages)

2.4 ELECTRICAL INSTALLATION

Perform the connection according to the scheme. Factory connection must not be changed! (Obrázek 5). In

the electric wiring casing remove the partition corresponding with the input wire diameter of φ8 or φ10

(Figure 4).The degree of protection of electric parts of the heater is IP 44. Power input of electric element is

2000 W.

It is necessary to observe the below requirements during the electric wiring.

•

The wiring diagram is attached to the heater on the side of the electric installation

guard (see Fig. 5).

•

Connection, repairs, and wiring inspections may only be implemented by a company

(person) authorised to such activity.

•

Expert connection must be confirmed on the warranty certificate.

•

The heater is connected to the 230 V/50 Hz electrical network using a fixed moving

conductor with a switch that turns off all network poles and the circuit breaker

(protector).

•

Installations in bathrooms, laundry rooms, rest rooms and showers, must be in

compliance with standard.

•

The degree of protection of electric parts of the heater is IP 44.

•

Adhere to the protection against electric shock injury according to standard.

Figure 4

Figure 5

- 12 -