Drazice OKC 160 NTR / BP Manuel d'utilisation et d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice OKC 160 NTR / BP. Drazice OKC 160 NTR / BP 20 pages. Stationary water heaters
Également pour Drazice OKC 160 NTR / BP : Manuel d'utilisation et d'installation (17 pages), Manuel d'utilisation et d'installation (12 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (20 pages), Manuel d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (13 pages)

Drazice OKC 160 NTR / BP Manuel d'utilisation et d'installation

2.4 ELECTRIC WIRING

2.4.1 ELECTRIC INSTALLATION GENERAL INFORMATION

the electric wiring casing remove the partition corresponding with the input wire diameter of ∅8 or ∅10
Perform the connection according to the scheme. Factory connection must not be changed! (Figure 5) In
(Figure 4). The degree of protection of electric parts of the appliance is IP 45. Power input of electric
element is 4000 W.
Figure 4
It is necessary to observe the below requirements during the electric wiring:
The electric wiring scheme is attached to the appliance on the side of the electric
installation guard (Figure 5).
Connection, repairs, and wiring inspections may only be implemented by a company
(person) authorised to such activity.
Expert connection must be confirmed on the warranty certificate.
The appliance is connected to the 3/N/PE ~ 230V/50Hz electric network using a fixed
moving conductor with a switch that turns off all network poles and the circuit
breaker (protector).
Installations in bathrooms, lavatories and showers must comply with the standards.
The degree of protection of electric parts of the appliance is IP 45.
Respect the rules of protection against electrical injuries in accordance with
Standards.
Figure 5
- 12 -