Drazice PTO 1733 Manuel d'utilisation et d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Drazice PTO 1733. Drazice PTO 1733 14 pages. Little flow heaters
Imprimer la page2.2 CONNECTING THE HEATER TO ELECTRIC NETWORK
Heater - connect to fixed supply.
The appliance must be connected with a protective conductor! Electric installation of heaters
with fixed connection shall only be performed by an authorised firm holding a licence
for works on electric equipments. Correctness of installation must be confirmed
in the warranty certificate. Without that confirmation, the warranty for the product
is not applicable!
Parts that require intervention in the electric part of the appliance shall only be replaced with an authorised
electric service shop! Failing to follow the instructions advised by the manufacturer constitutes cessation
of the title to warranty repair!
2.3 MAINTENANCE INSTRUCTIONS
Maintenance of flow heater is very simple. It is only limited to maintaining its surface cleanliness, checking
the cleanliness of the sieve in the cold water inlet, and cleaning of the pearlator or the shower element.
Pearlator
During cleaning, unscrew the pearlator from the swivel arm. Take the element out and clean the holes of it.
Proceed in the opposite manner to assemble it.
Shower element
When cleaning the shower element, loosen the screw on the front drain surface. Take out individual elements
and clean the flow channels on the periphery of the elements, e.g. using a soft brush. Proceed in the opposite
manner to assemble it.
If, despite the cleaning, the water flow of the heater is lower, you need to clean the screen in the water inlet
to the heater.
Cleaning the screen in the water inlet
First disconnect the appliance using the protection element from the power supply and familiarise other
heater users with its disconnection. Then close the water supply. Dismantle the heater from the wall
and from the water inlet. Clean the screen (sieve) and proceed in the opposite manner to mount the heater
back on.
Protection from freezing and damage due to frost
If the flow heater is mounted at a place with a risk of freezing in winter (e.g. cottages or cabins not occupied
in winter), the appliance has to be dismantled and store it in such manner to avoid its exposure to frost. Pure
removal of residual water in the heating element and labyrinth by blowing through the drain arm
is not enough, and does not protect against damage caused by frost.
If the stated instructions are not followed and the appliance gets damaged by frost, the title
to warranty repair ceases due to improper use of the product.
- 10 -