ANCEL SQ-129 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ANCEL SQ-129. ANCEL SQ-129 4 pages. 3-in-1 led work light

Step 2: 2XPE ON /OFF

Press the switch for about 3 seconds in any lighting mode, 2XPE is on, Note:

When the light is on, the default 2XPE lighting mode is cool white (100% brightness),

briefly press the button again to turn 2XPE SOS -off the light.

Step 3: USB Charging Connection

Connect the USB charging cable to the Type-C port to charge your device.

The charging power is Dc 5V/1.5A. The full charging time is 3 hours.

Step 4: USB Output Port

You can use it as a power bank. The port is USB output and the output

power is DC 5V/1.5A.

Step 5: Installation

1. Strong magnetic installation, there is a strong magnet at the bottom of the lamp,

which can be magnetically attracted to the surface of metal-iron materials.

2. Carabiner installation, the screw at the bottom of the lamp can be turned clockwise

to install the carabiner, and the carabiner can be installed with a hook.

3. Tripod installation, the screw at the bottom of the lamp can be turned clockwise to

install the tripod.

Attention

1. Do not look directly at the LED light, it may hurt your eyes.

2. Please use the USB charging cable to charge the lamp before use. The input

power is DC 5V/1.5A, and it takes about 3 hours to fully charge the lamp. During

charging, the blue charging indicator will flash, and when it is fully charged, 4 blue

indicator lights will light up at the same time, indicating 100%power, 1 blue indicator

means 25% power, and the power can be judged by the number

of bright blue indicators, how many.