DrBrowns Insta-Prep AC262 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DrBrowns Insta-Prep AC262. DrBrowns Insta-Prep AC262 17 pages. Water warmer & dispenser
Également pour DrBrowns Insta-Prep AC262 : Manuel d'utilisation (17 pages)

Imprimer la page

PREPARING FOR USE

1. Wash reservoir and lid before use according to cleaning instructions on page 4.

CAUTION: Do not plug unit in without filling reservoir with water first.

2. Remove lid and add water to the reservoir. Water level must always remain between

the MIN and MAX fill lines.

3. Replace lid on top of reservoir. Replace water after 24 hours or when water is depleted

(whichever comes first).

WARMING

1. Once water is added to reservoir as outlined in steps 1-3 of Preparing for Use, plug in power

cord. The Insta-Prep™ turns on as soon as it is plugged in.

2. Press

Temperature Control Button until you reach your desired water temperature.

A. Blue - room temperature, no heat

B. Yellow - around body temperature

C. Red - slightly above body temperature

NOTE: The indicator light blinks slowly while the water is warming and turns solid once

it has reached the desired temperature. The indicator light blinks quickly when the water

temperature is above the desired temperature and needs to cool.

Depending on the starting temperature of the water added to the reservoir,

it could take 10-20 minutes to warm to the desired temperature.

3. Press

Light Button to turn the light on or off.

4. Place bottle in bottle holder, centering it as much as possible.

5. Press down on the water dispenser to fill bottle with water and release to stop

dispensing water.

6. Add formula powder to bottle. Always follow formula manufacturer's instructions

for preparation.

CAUTION: ALWAYS TEST CONTENT TEMPERATURE BEFORE FEEDING YOUR BABY.

TROUBLESHOOTING

If the warmer is not operating, check that:

A. The power cord is connected to the power outlet.

B. Water has been added to the reservoir.

CLEANING

CAUTION: Unplug from outlet and allow to cool before cleaning.

DO NOT IMMERSE IN WATER.

NOTE: DO NOT use bleach, scouring pads, abrasive cleaners, or solvents for cleaning.

Water Reservoir and Lid: Before each use, hand wash with warm, soapy water, rinse,

and dry thoroughly.

CAUTION: Water reservoir is glass. Handle with care.

Base: Wipe with damp cloth or sponge.