Dreadbox HADES Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dreadbox HADES. Dreadbox HADES 7 pages. Analog bass synthesizer
Également pour Dreadbox HADES : Manuel de l'utilisateur (8 pages), Manuel de l'utilisateur (8 pages), Manuel de construction (12 pages)

Imprimer la page

2.6 Envelope

Hades's AD/RS is dedicated to the Filter. It may deliver up to 5V of Envelope (also accessible on a

patch).

1. Attack speed

2. Decay and Release speed

3. Sustain point

4. Envelope Level

5. Decay or Decay and Release

2.7 LFO

The LFO needs to be patched in order to be used. It has a wide

range of frequencies, from 10 minutes up to 3kHz (3000 Hz).

1. Sets the Rate

2. Sets the Depth

2.8 Patching

A. Outputs - Those patch points only send voltage. You can send their

CV to other devices, but first be sure that the receiver can accept such

a voltage.

ENV: Sends the envelope's voltage in a 0-5V level.

LFO: Sends the LFO's voltage in a +/- 5V level.

MOD: Sends the modulation wheel into a 0-5V format. The small knob

is an attenuator for the total amount.

1V/OCT: Sends the Pitch's tracking

NEVER CONNECT AN OUTPUT WITH ANOTHER OUTPUT

This might cause serious damage to the unit and Dreadbox will not

take any responsibility.

B. Inputs

Those patch points only receive voltage. It is safe to send more

voltage than indicated (up to +/- 10V), but this does not mean that you

get a result.

PW: Controls the oscillator's pulse width (+/- 5V)

VCF: Controls the filter's frequency (+/- 5V)

VCA: Controls the Amp's level. (0-5V)

By inserting a cable will deactivate the AR envelope.

CV: Controls the oscillator's pitch (+/- 10V)

GATE: Controls the gate's activation (0-5V)