Dreadbox Nyx V2 Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dreadbox Nyx V2. Dreadbox Nyx V2 14 pages. Analog, 2 oscillators, 12-24db dual filter, 2 function generators, extensive digital reverb, 30 eurorack patch points
Également pour Dreadbox Nyx V2 : Manuel d'accord (3 pages)

Imprimer la page

The LFO

Nyx V2 has a simple but effective LFO, which was designed mostly for pitch vi-

brato sounds.

LFO Controls:

1. RATE knob - sets the LFO cycle rate

2. DEPTH knob - sets the LFO amount

The Reverb

We have developed a new algorithm for the Reverb of the Nyx V2, to accompany drones so as to create

haunted and aetherial soundscapes. The first three slider controls consist the modulation of the effect

and the last three are the actual reverb controls.

The Modulation of the Reverb, is a random voltage generator, which will

actually create a "movement" on the sound.

Modulation Controls:

1. WAVE slider - smooths the waveform of the modulation

2. RATE slider - sets the frequency of the modulation event

3. LEVEL slider - sets the amount of the modulation

Reverb Controls:

4. FEED slider - sets the decay of the reverb

5. SIZE slider - sets the room size

6. MIX slider - blends between completely dry to wet sound

Please note that overdriving the signal, especially when the FEED is high, will cause the effect to distort.

Also when setting the mix of the oscillators above 70% or applying too much resonance, self oscillation

can distort the signal.

The Amp

In order to control the Nyx V2 VCA, we use the Amp Modulator, which is described in the Modulator

section (p. 5). The Amp Modulator is functioning exactly the same as the others. The difference is that

instead of the LFO mode, we have a DRONE mode, which is exactly the same but named differently for

clarity, as when this is engaged the synthesizer produces sound without having to trigger it via MIDI or

Gate.

Drone Mode

There is another Drone Mode available through setting switches 3,4,5 to the ON position that enables

you to have pitch control over the Oscillators without the use of an external device. Now the GLIDE

sliders of each oscillator transforms to the Coarse Tuning, but the Octave switches and the MIDI note

messages are deactivated. You can still send all the other available MIDI messages.