Anchor AN-Mini Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Anchor AN-Mini. Anchor AN-Mini 12 pages. Audio sound system
Également pour Anchor AN-Mini : Fiche technique (1 pages), Manuel du propriétaire (4 pages), Spécifications (1 pages), Manuel du propriétaire (7 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel du propriétaire (10 pages)

Imprimer la page
Anchor AN-Mini Manuel du propriétaire
AN-1000X+
BASIC SYSTEM OPERATION
1.
Position the speaker to face your audience
2.
Set volume control on front of speaker to minimum
3.
Plug in AC power cord to a wall power outlet
4.
Plug a microphone into the Mic Input or an external audio source
into a Line In
5.
Turn the power switch on the rear panel ON (red LED on front
panel should light)
6.
Adjust volume, bass, and treble controls to desired levels
To pair or unpair your AnchorLink wireless microphone or belt pack,
see the instructions on page 5.
ANCHORLINK DUAL
WIRELESS MIC RECEIVER
Depending on your purchase, your unit
may include zero or one dual wireless
mic receiver
RCA LINE OUTPUT
AN-1000X+ Back Panel Silkscreen Artwork
POWER INLET
DIP SWITCH
LINE INPUTS
• 1/4" PHONE
• RCA
SPEAKER OUTPUT
*BALANCED INPUT JACK & DIP SWITCH
The balanced XLR input jack allows the AN-1000X+ to be
used in a variety of applications. The input can be configured
by the user for a Lo-Z microphone or bridging balanced
line-level inputs (such as used in the pro-audio and broadcast
industry) . In addition, the input has 15 volt phantom power
which may be switched on or off.
The factory default setting is for microphone-level inputs with
15 volts DC phantom power. Follow the DIP switch option
settings below to change the settings using a small pointed
tip object.
BALANCED
XLR INPUT
AN-1000XU2+
MIC
MIC
ON
ON
ON
LINE
LINE
DIP Switch Option Settings
FUSE
217-0327-000 Rev. B
MIC
LINE
POWER SWITCH
2