Alen MPF-12CR Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alen MPF-12CR. Alen MPF-12CR 15 pages. Portable air conditioner
Également pour Alen MPF-12CR : Manuel du propriétaire (17 pages)

Imprimer la page

Window Kit Installation

Your window kit has been designed to fit most standard

Vertical and horizontal window applications, However, it

may be necessary for you to improvise/modify some aspects

of the installation procedures for certain types of window.

Please refer to Fig. 11 & Fig. 11a for minimum and maximum

window openings.

Drain Tank Safety Feature

This unit is equipped with a internal water tank, two full-safe

switch mechanisms, one is used to control the water pump

drainage, the other is used to monitor the water level inside

the internal water tank. When the water level reaches a

predetermined level, the full-safe switch mechanism is

activated. The digital display shows P1 and the water full

indicator light illuminates. Carefully move the unit outside,

remove the rubber blockage from the back drainage hole

and drain the water off. The unit will continue operating

properly.

IMPORTANT:

1) BE SURE TO UNPLUG THE UNIT BEFORE CLEANING.

2) DO NOT USE GASOLINE, THINNER OR OTHER CHEMICALS TO CLEAN THE UNIT.

3) DO NOT WASH THE UNIT DIRECTLY UNDER A TAP OR USING A HOSE. THE ELECTRICAL

CAUSE DANGER.

4) IF THE POWER CORD IS DAMAGED, IT SHOULD BE REPAIRED BY MANUFACTURE OR ITS

AGENCY.

1 AIR FILTER

Clean the air filter at least once every two weeks to

prevent interior fan operation because of dust.

Removal

Pull out the filter cover and remove the air filter from the

filter cover.

Cleaning

Wash the air filter by immersing it gently in warm water

(about 40 C/104 F) with a neutral detergent. Rinse the

filter and dry it in a shady place.

Mounting

Attach the air filter to the filter cover using the attachment

hooks on the inner surface of the cover. Put the filter cover

back to the unit.

2 UNIT ENCLOSURE

Use a lint-free cloth soaked with neutral detergent to clean

the unit enclosure. Finished by a dry clean cloth.

MAINTENANCE

Horizontal

window

Window Slider Kit

Minimum:67.5cm(2.22ft).

Maxmum:123cm(4.04ft).

Fig.11

Horizontal

window

Window Slider Kit

Minimum:67.5cm(2.22ft).

Maxmum:123cm(4.04ft).

Fig.11a

Fig.12