Alen MPF-12CR Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alen MPF-12CR. Alen MPF-12CR 17 pages. Portable air conditioner
Également pour Alen MPF-12CR : Manuel du propriétaire (15 pages)

Imprimer la page

INSTALLATION

1 Important:

Install the portable air conditioner in a flat and spacious location

where the air outlets will not be covered up. A minimum

clearance of 11.8in from a wall or other obstacles should

be kept. The air conditioner shall not be used in the laundry.

The plug shall accessible while the air conditioner is being operated.

2 DUCT MOUNT INSTRUCTIONS:

A) TEMPORARY-

1. Attach one end of the duct to the exhaust air outlet of the

mobile air conditioner, first fit the left side of the duct on the

exhaust air panel, then the right side duct. Push it

downwards, be sure to fix thoroughly. (See the Fig.8)

2. Attach the other end of the duct to adaptor B.

3. Put the end of duct to a nearby window.

B) PERMANENT-

1. Attach one end of the duct to the exhaust air outlet of the

mobile air conditioner. According to the arrow direction,

first fit the left side of the duct on the exhaust air panel,

then the right side duct. Push it downwards, be sure to fix

thoroughly. (See the Fig.7)

2. Install the adaptor A onto the wall by using 4 wall plug and

screws, be sure to fix thoroughly. (See the Fig.9)

3. Attach the other end of the duct to adaptor A.

4. Cover the hole using the adaptor cap when not in use.

The duct can be compressed or extended between 20in

and 80in, but it is desirable to keep the duct length to a

minimum.

IMPORTANT:

DO NOT OVER BEND THE DUCT (SEE Fig.10)

Fig.8

Fig.7

Exhaust Air Oulet

Duck

Adapter A

Skruer

Rawlplugs

max 47.25in

min 11.81in

Fig.9

Fig.10