Dream Catcher ME3000 Analog Electronics Lab 6 Manuel - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dream Catcher ME3000 Analog Electronics Lab 6. Dream Catcher ME3000 Analog Electronics Lab 6 19 pages. Rf class a tuned amplifiers
Imprimer la page______________________________________________________________________
1.
Introduction
A Class A transistor amplifier is biased so that the transistor conducts continuously. The transistor of
the Class A amplifier is biased in the active region during the whole duration of operation. The Class A
amplifier is a linear amplifier since the transistor operation in the active region is almost linear. Two
types of amplifiers can be designed – tuned and untuned amplifiers. An untuned amplifier has a wider
bandwidth than a tuned amplifier, as shown in Figure 1.
Voltage
gain
A tuned amplifier consists of a resonance network as illustrated in Figure 2. It includes a parallel RLC
tank circuit. This circuit will experience high impedance and maximum voltage gain at the resonance
frequency. The resonance frequency can be calculated by
ME3000 Analog Electronics
Figure 1 – Class A Amplifier Frequency Response
R
Figure 2 – RLC Tank Circuit Schematic Diagram
Tuned amplifier
frequency response
Untuned amplifier
frequency response
1
f
o
2
LC
L
C
http://dreamcatcher.asia/cw
Frequency
.
Lab 6 - 2/19