Bosch 2 Manuel de l'utilisateur et instructions d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Bosch 2. Bosch 2 35 pages. Mini blender
Également pour Bosch 2 : Manuel d'installation rapide (16 pages), Manuel d'installation et d'utilisation (18 pages), Manuel d'instructions original (13 pages), Manuel d'instructions original (22 pages), Manuel d'instruction (32 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur et instructions d'installation (16 pages), Manuel d'instruction (42 pages), Manuel d'utilisation (8 pages), Manuel d'instruction (8 pages), Manuel d'instruction (12 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (9 pages), Manuel d'instruction et instructions d'installation (36 pages), Manuel de l'utilisateur et instructions d'installation (48 pages), Manuel d'utilisation (26 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur et instructions d'installation (24 pages), Manuel d'instruction (42 pages), Informations pour l'utilisation (28 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (24 pages)

Bosch 2 Manuel de l'utilisateur et instructions d'installation
is highlighted on the display.
Requirement: 
Change the cooking time using the
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
is highlighted on the display.
Requirement: 
Reset the cooking time to zero using the
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ The end time cannot be set for types of heating with
grill function.
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment too long.
Requirements
¡ A type of heating and a temperature or setting are
set for the main oven  ⁠ .
¡ A cooking time is set.
Press the
button repeatedly until
1.
in the display.
Press the 
or
button.
2.
a The display shows the calculated end time.
Use the
or
 button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
4.
9  Childproof lock
Secure your appliance to prevent children from acci-
dentally switching on the main oven
settings.
Note: After a power cut, the childproof lock is deactiv-
ated.
or
button.
button.
is highlighted
or changing the
Press any button to end the signal prematurely.
To set another cooking time, press the
When your food is ready, switch off the appli-
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
is highlighted on the display.
Requirement: 
Use the
or
 button to delay the end time.
a The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end at any time.
is highlighted on the display.
Requirement: 
Reset the end time to the current time plus the set
cooking time using the
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position ⁠ .
Use the
or
 button to set the time.
1.
Press the
button.
2.
a The time that is set appears on the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position ⁠ .
Press and hold the  button until the clock flashes
1.
on the display.
Use the
or
button to change the time.
2.
a The appliance applies the change after a few
seconds.
9.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
"Off" position ⁠ .
To activate the childproof lock, press and hold the
button until
appears in the display.
To deactivate the childproof lock, press and hold
the
button until
Childproof lock en
button.
button.
goes out in the display.
13