Bosch 2 Manuel de l'utilisateur et instructions d'installation - Page 32

¡ Do not install the appliance behind a decor-

ative door or the door of a kitchen unit.

There is a risk of overheating.

¡ Cut-out work on the units should be carried

out before installing the appliance. Remove

any shavings. Otherwise, the correct opera-

tion of electrical components may be ad-

versely affected.

¡ The mains socket for the appliance must

either be located in the hatched area

outside of the area where the appliance is

installed.

Any unsecured units must be secured to

the wall using a standard bracket ⁠ .

¡ Wear protective gloves so that you do not

cut yourself. Parts that are accessible dur-

ing installation may have sharp edges.

¡ Dimensions of the figures in mm.

WARNING ‒ Risk of fire!

It is dangerous to use an extended power

cord and non-approved adapters.

▶ Do not use extension cables or multiple

socket strips.

▶ If the power cord is too short, contact Cus-

tomer Service.

▶ Only use adapters approved by the manu-

facturer.

ATTENTION!

Carrying the appliance by the door handle could break

it. The door handle cannot support the weight of the

appliance.

▶ Do not carry or hold the appliance by the

door handle.

18.2 Appliance dimensions

You will find the dimensions of the appliance here

18.3 Installation in a tall unit

Observe the installation dimensions and the installation

instructions when installing in a tall unit.

¡ To ventilate the appliance, there must be a gap of

20 mm between all intermediate floors and the wall.

¡ If the tall unit has another back panel in addition to

the element back panels, this must be removed.

¡ Only fit the appliance up to a height which allows

accessories to be easily removed.

Installation instructions en