Bosch 2 Manuel de l'utilisateur - Page 4

en Safety

1.5 Safe installation

WARNING ‒ Risk of electric shock!

Improper installation is dangerous.

▶ Connect and operate the appliance only in accordance with the

specifications on the rating plate.

▶ Connect the appliance to a power supply with alternating cur-

rent only via a properly installed socket with earthing.

▶ The protective conductor system of the domestic electrical in-

stallation must be properly installed.

▶ Never equip the appliance with an external switching device,

e.g. a timer or remote control.

▶ When the appliance is installed, the mains plug of the power

cord must be freely accessible. If free access is not possible, an

all-pole isolating switch must be installed in the permanent elec-

trical installation according to the installation regulations.

▶ When installing the appliance, check that the power cable is not

trapped or damaged.

If the insulation of the power cord is damaged, this is dangerous.

▶ Never let the power cord come into contact with heat sources.

WARNING ‒ Risk of explosion!

If the appliance's ventilation openings are sealed, a leak in the re-

frigeration circuit may result in a flammable mixture of gas and air.

▶ Keep ventilation openings, in the appliance enclosure or in the

built-in structure, clear of obstruction.

WARNING ‒ Risk of fire!

It is dangerous to use an extended power cord and non-approved

adapters.

▶ Do not use extension cables or multiple socket strips.

▶ If the power cord is too short, contact Customer Service.

▶ Only use adapters approved by the manufacturer.

Portable multiple socket strips or portable power supply units may

overheat and cause a fire.

▶ Do not place portable multiple socket strips or power supply

units on the back of the appliance.