Anchor F3 Manuel d'instructions d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Anchor F3. Anchor F3 16 pages. Frame tent
Imprimer la page
Installation Cross Web
Cross web is installed by running ends
of Cross web around Int. weldment and
thru U-Bolt on outside of weldment.
Attach ring back to hook.
Important Dismantling Note: For
Ease in Dismantling (30' model),
Installation Cross Web must be
reinstalled.
STEP 3
Connect eave purlins to weldments
After rafters and hips are connected to weldments, Start at one of the rafters and
connect eaves to weldments going from one side to the other all the way around.
OPTIONAL
RIDGE BRACE
30' FRAME ONLY
Installation Cross Web
Installed on 30' Frame.
END
HERE
Installation Cross Web
For 30' Frame only
OPTIONAL
RIDGE BRACE
30' FRAME ONLY
Installation Cross Web
Installed on 30' Frame.
START HERE
After ends are attached, tension the
strap using the cam buckle.
Int. Weldment
Wrap web around
upright, thru ring
and attach back
onto itself.
Figure 2b
Figure 2c
Figure 3
7