Anchor AnchorMAN BP-900 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Anchor AnchorMAN BP-900. Anchor AnchorMAN BP-900 4 pages. Wireless intercom system
Également pour Anchor AnchorMAN BP-900 : Manuel du propriétaire (6 pages)

Imprimer la page

baSiC OPEraTiON

1. Charge batteries for 6 hours or until charger LED turns of

NOTE: belt packs operate about 7 hours per charge.

2. Plug headset cable into belt pack & adjust boom

3. Hold down PWR button to turn belt pack ON

4. Set belt packs to same GROUP

5. Adjust Headset Volume level

6. Press & hold PTT button to talk, (belt pack top)

release PTT button to listen

NOTE: repeat steps for each belt pack in the network.

See page 3/Active Mode for voice activated operation.

SySTEm raNgE

AnchorMAN belt packs can communicate through many solid objects. How-

ever, if the solid objects contain metal or liquids, range will be reduced. Also,

range will reduce as the path between belt packs becomes more obstruct-

ed. As belt packs get farther apart AnchorMAN automatically reverts to sim-

plex mode for a maximum range of 2,500'/750m. This means you will oper-

ate in Push to Talk mode and speak one person at a time. If the signal fades

the belt packs are too far apart and you will need to move closer together.

diP SWiTCh FEaTurES

The DIP Switches are located on the belt pack behind the antenna, to access flip an-

tenna up. A description of DIP 1 & 2 can be found under Changing User ID Settings

at the top of this page. DIP 3 is not in use at this time and should not be changed

from the factory setting.

CauTiON: Turn belt Pack power OFF before making any

changes to diP switch settings.

diP SWiTCh 4 – ENablE FivE-miNuTE "TimEd" vOX mOdE

When DIP 4 is set to the ON position, VOX transmissions will be limited to approxi-

mately 5 minutes. Each subsequent voice trigger will reset the five-minute timer.

diP SWiTCh 5 – ENablE adJuSTablE SquElCh lEvEl (rSSi)

Set DIP 5 to the ON position to use the Headset Volume Control buttons to adjust

the squelch level. Use this feature to minimize RF interference from the surround-

ing area.

NOTE: a high squelch setting reduces interference

but may reduce performance range.

grOuP SElECTOr lEd

grOuP SElECTOr buTTON

Page 3

aNChOrmaN bElT PaCk

model Shown: bP-900

aNTENNa JaCk

SMA Connector

diP SWiTChES

Preset at factory

DIP Settings:

ChargEr POrT & ChargEr lEd

Connect Gang Charger for NiMH batteries

hEavy duTy aNTENNa

For videos on how to setup & use the anchormaN: www.anchoraudio.com

TraNSmiT/rECEivE iNdiCaTOr lEd

PuSh TO Talk buTTON

Page 3

hEadSET vOlumE CONTrOl

Page 5

bElT CliP

baTTEry COmParTmENT

Press lightly & slide to

remove cover

hEadSET JaCk

XLR Connector

POWEr buTTON

miCrOPhONE SENSiTiviTy

Page 5

WhaT iS aNChOrmaN

AnchorMAN is a wireless full duplex intercom

system that is easy to configure and simple to

operate. Up to four belt packs can talk at once

and an unlimited number of belt packs can lis-

ten. Belt packs can be assigned to up to four sep-

arate groups. The transmitter and receiver oper-

ate utilizing FDMA techniques in the 945 – 951

MHz range without the need for a base station.