Anchor Seville Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Anchor Seville. Anchor Seville 6 pages. Lectern sound system

Imprimer la page

Seville Lectern Sound System Owners Manual

Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity

wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The

antennae are mounted internally so there are no obstructions or risk of damage.

CHANNEL SELECTION - BUILT-IN RECEIVER

Select a channel, set the built-in receiver & microphone transmitter

to that channel before using your wireless system.

If you have two wireless receivers repeat above for the second receiver.

Remember, each receiver/transmitter pair must be set to different

channels to avoid interference.

CONTROLLING FEEDBACK

Feedback, a howling noise or shrill sound, is self-generated by

the sound system. It's caused by a microphone picking up the

sound coming from the speaker and then reamplifying it. Once a

feedback loop starts, it continues until the system is adjusted.

FEEDBACK CAUSES

• Microphone too close, pointing towards

• Volume setting is too loud for room

• Sound reflecting off hard surfaces

1. Choose any available wireless channel from 1 thru 16

(see page 4 for transmitter instructions)

2. Set the Wireless Channel Selection Knob to the channel you

choose in step 1

NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area!

or in front of speaker

CAUTION: Feedback can damage your equipment

& may be hazardous to hearing.

Visit Our Website: www.anchoraudio.com

DIVERSITY WIRELESS BY ANCHOR AUDIO

WIRELESS 1 CHANNEL

SELECTION

WIRELESS 1 RX

INDICATOR LIGHTS

WIRELESS 1

VOLUME CONTROL

Change channels until you find a clear frequency!

AVOIDING & ELIMINATING FEEDBACK

• Point microphone in a different direction

• Keep microphone away from the speaker

• Place speaker in FRONT of the microphone

• Reduce the sound system volume levels

CORRECT SYSTEM PLACEMENT

WIRELESS 2 CHANNEL

SELECTION

WIRELESS 2 RX

INDICATOR LIGHTS

CHANNEL

WIRELESS 1

WIRELESS 2

VOLUME CONTROL

WRONG SYSTEM PLACEMENT

MADE IN USA

SIX YEAR WARRANTY