Anchor AF-4003 Manuel d'installation rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Anchor AF-4003. Anchor AF-4003 9 pages. Under counter water filter system
Également pour Anchor AF-4003 : Manuel d'instructions d'installation (10 pages), Manuel d'installation rapide (9 pages)
Imprimer la page
Connection to the Filter Assembly
Your filter assembly comes pre-installed with filter cartridges. You only
need to attach the quick fitting elbow connectors to inlet and outlet of
the filter assembly and attach feed water and faucet tubes to them.
Once connected, the system will be ready for use.
Remove the color-coded lock pins before inserting the tubes and
replace after you are done.
OUT - Blue Tube
▪ Blue tubing connects
faucet to the outlet side
of assembly
Startup Procedure
1. Check to see all connections are made.
2. Check that all sumps are secure using the housing wrench provided.
3. Slowly turn on water by turning the needle valve counterclockwise.
4. Handle of the faucet should be perpendicular to the spigot (closed).
5. Check for leaks.
WARNING: Before using filter system for the first time, the system must
be purged for several minutes to flush out black carbon fines. Initially,
the water may contain tiny air bubbles and taste slightly sweet this is
normal and harmless, and will clear up after flushing.
6
IN - Red Tube
▪ Red tubing connects feed
water supply valve to inlet
side of assembly