Formax FD 574 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Formax FD 574. Formax FD 574 6 pages. Tabletop cut-sheet cutter

Imprimer la page

3. Turning the power ON

1. Conﬁ rm that the power switch is turned off.

2. Securely connect the female plug of the power

cord that came with the FD 574 to the inlet.

Female plug

of the power

cord

3. Insert the male plug of the power cord into the

outlet (three-slot).

WARNING

● Insert the power cord plug ﬁ rmly into the

socket, so that proper electrical contact is

effected. If grounding is imperfect and

electrical leakage occurs, ﬁ re or electric

shock could result.

Male plug of

the power

supply cord

cord

U80033

Inlet

U80021

Outlet

NOTE

When installing an optional unit, complete the

main unit installation and make sure that the ma-

chine operates normally before installation.

Refer to the Installation Manual of each optional

unit for installation.

4. Confirm that the plugs in steps 2 and 3 are se-

curely inserted.

● Connect the machine to an outlet pro-

viding a 60Hz, 15A power supply of

at least 120V.

● Insert the power cord's plug correctly

into the outlet, so that electrical con-

nection is effected completely.

● Position the machine close to the pow-

er outlet. Do not connect multiple loads

to a single outlet. If an extension cord

is necessary: Extension cord should

be of at least 130V, 15A speciﬁ cation,

conforming to standard, and not ex-

ceed 5 m in length.

● The power cord should never be

stepped on, or crushed between ob-

jects. If it is, accidents could result.

WARNING