Electrolux ESF 2200 DW Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux ESF 2200 DW. Electrolux ESF 2200 DW 16 pages.
Imprimer la page
- 1. Table of Contents
- 2. Safety Instructions
- 3. Product Description
- 4. Control Panel
- 5. Use of the Appliance
- 6. Use of Dishwasher Salt
- 7. Use of Detergent and Rinse Aid
- 8. Loading Cutlery and Dishes
- 9. Setting and Starting a Programme
- 10. Information for Test Institutes
- 11. Programmes
- 12. Care and Cleaning
- 13. What to Do if
- 14. Technical Data
- 15. Environment Concerns
- 16. Installation
Problem
Limescale particles on the
dishes.
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and dull.
TECHNICAL DATA
Dimensions
Electrical connection
Water supply pressure
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
ENVIRONMENT CONCERNS
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
Possible cause
The quantity of detergent was
not sufficient or missing.
The salt container is empty.
The salt container cap is not
closed correctly.
Rinse aid dosage is too high.
Rinse aid dosage is too low.
The detergent can be the
cause.
You have set a programme
without a drying phase.
The rinse aid dispenser is emp-
ty.
Width
Height
Depth
Refer to the rating plate
Voltage
Frequency
1)
Minimum
Maximum
Place settings
Left-on mode
Off-mode
Make sure that the quantity of
detergent is sufficient.
Fill the salt container with dish-
washer salt.
Make sure that the salt contain-
er cap is closed correctly.
Decrease the rinse aid dosage.
Increase the rinse aid dosage.
Use a different brand of deter-
gent.
Set a programme with the dry-
ing phase.
Fill the rinse aid dispenser with
rinse aid.
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
electrolux 13
Possible solution
550 mm
438 mm
500 mm
220-240 V
50 Hz
0.03 MPa
1 MPa
0.34 W
0.29 W
6
.