CarlStahl SL000161 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CarlStahl SL000161. CarlStahl SL000161 10 pages. Cable gripper

Imprimer la page

3.2

Initial Assembly

1. Cable holder is to be fixed on desired object (via internal / external threading, or fixing with screw / dowel)

2. Insert the rope with a slight pressure against the resistance of the push button

3. Push the rope / cable holder to the desired position.

4. With a slight pull on the load the clamping is carried out.

5. If existing: tighten the safety nut

Cable holder for Y-suspension: secure the cross-span with a fixing screw

Cable holder with hook: Close / check the spring latch

3.3

Repositioning of the Load

1. Relieve the cable holder (by lifting or supporting the load)

2. If existing: Release the safety nut on the push button

3. Unlock the wire rope by pressing the push button

4. Move and reposition the cable holder while pressing the push button

5. Release the push button

6. With a slight pull on to the load the clamping is carried out.

7. If existing: tighten the safety nut

Cable holder for Y-suspension: secure the cross-span with a fixing screw

Cable holder with hook: Close / check the spring latch

3.4

Dismantling / Disassembly

1. All loads must be careful and completely secured before dismantling / disassembly.

2. If existing: Release the safety nut

Unlock the wire rope by pressing the push button

Remove the wire rope from the cable holder / disconnect the cable holder from the wire rope

185_05042023

Carl Stahl Technocables GmbH

Tobelstr. 2

D - 73079 Süßen

Germany

05042023

Contact

Phone: (+49) (0)7162/9443 - 0

E-Mail: [email protected]

http://www.carlstahl-technocables.de/

Seite 7 von 10