Athentek Circo Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Athentek Circo. Athentek Circo 8 pages. Wearable smart tracking device

Imprimer la page

How do I change the SIM card in the device?

 Turn off Circo before taking the SIM card out.

 After putting in the new SIM card, turn on the device and the app will prompt you to enter

a new phone number.

 If the new phone number is not changed within the Circo app, then tracking mode can't be

activated.

Why does the device show offline?

 Circo may be in a location with poor cellular reception.

 Please make sure the SIM card has data service.

 Please make sure the SIM card's PIN code is not locked.

 If you are using a prepaid SIM card, please make sure there is still a balance on the card.

How do I delete or unfollow a Circo device?

 If you are the Host, you can delete the Circo from "Profile". When the Host deletes the

Circo, the whole chatroom will be deleted and Followers no longer will see where that

device is on the app.

 The device will turn off automatically.

 Another person can add the device again using its ID number.

 A Follower can stop following a device from "Profile". When a Follower stops following a

Circo he will not be able to see its status but the chatroom will remain for other followers.

How long does tracking mode take to activate?

 There might be a slight delay depending on the cellular reception of Circo. Under normal

condition, it takes no more than 30 – 60 seconds to show Circo's location, and it will

continuously update its location for 5 minutes.

What does sleep time mean?

 During sleep time, Circo will turn off automatically and then turn back on automatically

when sleep time is over.

 Please note, if Circo's battery runs out of energy during sleep time, then it will not be able

to turn back on when sleep time is over.

 If you want to use Circo during sleep time, you can turn it on manually by pressing the

power button.

 Circo automatically turns on when you charge it, thus ending the sleep time.

How do I change sleep time for Circo?

 Circo has to be on when you change its sleep time. Gently press the power button to make

sure it green light flashes.