Electrolux ESF 67060 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux ESF 67060. Electrolux ESF 67060 20 pages.
Imprimer la page6 electrolux
Energy saver
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.
Cancel button
With this button you can cancel a washing
programme or a delay start. Refer to 'Select
and start a washing programme'.
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press one of the buttons
again and again until the indicator light of
the necessary programme comes on.
Refer to 'Washing programmes' for more da-
ta about the washing programmes.
Multitab button
Press this button to activate/deactivate the
multitab function. Refer to 'Multitab function'.
Energy saver button
This function decreases the temperature in
the drying phase. The power consumption
decreases by 25%.
The dishes can be wet at the end of the pro-
gramme when you open the appliance
door. We recommend that you keep the
door ajar and let the dishes dry.
Press this button to activate the function.
The related indicator comes on.
Delay start button
Use this button to delay the start of the wash-
ing programme with an interval between 1
and 24 hours. Refer to 'Select and start a
washing programme'.
Display
The display shows:
• The electronic adjustment of the level of
the water softener.
• Activation/deactivation of the rinse aid dis-
penser (only with multitab function on).
• The washing programme duration.
• Remaining time to the end of the washing
programme.
USE OF THE APPLIANCE
1. Be sure that the set level of the water
softener agrees with the water hardness
Indicator lights
It comes on when you activate the energy saver function. Refer to 'Energy
saver button'.
• The end of a washing programme. The
display shows a zero.
• Remaining time to the end of the delay
start.
• Fault codes.
Function buttons
Use the function buttons for these opera-
tions:
• To adjust electronically the level of the wa-
ter softener. Refer to 'Setting the water
softener'.
• To deactivate/activate the rinse aid dis-
penser when the multitab function is on.
Refer to 'What to do if...'.
Setting mode
The appliance must be in setting mode
for these operations:
• To select and start a washing pro-
gramme and/or a delay start.
• To adjust electronically the level of the wa-
ter softener.
• To deactivate/activate the rinse aid dis-
penser.
Press the on/off button. The appliance
is in setting mode when:
– All the programme indicator lights come
on.
Press the on/off button. The appliance
is not in setting mode when:
– Only one programme indicator light
comes on.
– The display shows the duration of a wash-
ing programme or a delay start.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Select
and start a washing programme'.
in your area. If not, adjust the water soft-
ener.
2. Fill the salt container with dishwasher salt.