Electrolux ESF236 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Electrolux ESF236. Electrolux ESF236 12 pages.

Description of the appliance

Use of a rinse conditioner will result in cleaner and faster

drying of the load, since it helps water to run off. Too

much conditioner may result in streakiness, too little may

cause white spots. The dispenser holds about 140 ml. This

is enough for 40-70 wash cycles, depending on the dosa-

ge setting. When the rinse conditioner level is approa-

ching the bottom of the scale it is time to refill the dispenser.

Adjust the dosage setting according to the hard-

ness if the water. Begin with the lowest dosage

setting and increase as necessary by turning the

arrow clockwise.

1. Swivel out the filler trough.

2. Fill up with rinse conditioner until the level reaches

up to the red mark on the level indicator tube; do

not overfill.

3. Wipe off any spillage carefully to prevent excessive

foaming during the next wash programme.

4. Close the filler trough afterwards.

Do not fill the rinse aid dispenser with liquid

detergent.

It is important to keep all the holes in the spray arm clear.

A clogged hole can seriously affect washing efficiency. If

the spray arm needs cleaning, unscrew the nut clockwise,

remove the washer and lift off the spray arm. Clear the

holes and shake out any food remnants.

The purpose of the coarse filter is to catch large objects

such as toothpicks and pieces of eggshell. Make sure that

the filter is always clean. Lift it out and rinse it under run-

ning water whenever necessary.

It is just as important to keep this filter clean. A dirty or

clogged filter will always impair washing efficiency. The

fine filter can easily be lifted out for cleaning when you

have removed the coarse filter.

Pour the detergent into the compartment, for a normal load

about 1-2 tablespoons.

Only use detergents specially designed for

dishwashers.

- 4 -