formlabs Form Cure Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} formlabs Form Cure. formlabs Form Cure 8 pages.

Imprimer la page

ADDITIONAL RESOURCES

Safety
For complete information, see the included Safety Guide. The
Form Cure contains a heater to enable post-curing. Take care when
removing parts from the Form Cure. The metal turntable may be hot.

Best Practices

POST-CURE SETTINGS
For Standard Resins, use default post-cure settings of 60 °C for 30 minutes.
All other materials have unique recommended settings for optimal material
properties. Check for recommendations at formlabs.com/cure-support.
MAINTENANCE
Periodically lift the turntable to inspect for small pieces of cured resin.
Clean the turntable and the surface underneath as needed. Isopropyl
alcohol (IPA) is suitable to clean most surfaces. Use a non-abrasive
cloth on the reflective walls.
AFTER POST-CURING PRINTS
After washing, drying, and post-curing prints, consider adding other steps
to your printing workflow. Use sanding, priming, or painting to improve
presentation, or use other equipment to create molds from printed parts.

Additional Supplies

Powder-free disposable gloves
Mineral oil
More Information
Video tutorials and more instructions:
Post-curing recommendations:
Formlabs Inc.
35 Medford St. Suite 201 | Somerville, MA 02143 | USA
Original Instructions
Keep this manual for future reference.
This product complies with the requirements of the
Electromagnetic Compatibility Directive as defined in
2014/30/EU and Low Voltage Directive 2014/35/EC.
This guide is available in other languages on support.formlabs.com.
Sandpaper
Primer and paints
support.formlabs.com
formlabs.com/cure-support