Athletica Sport Systems A-Frame Glass Cart Manuel du produit - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Athletica Sport Systems A-Frame Glass Cart. Athletica Sport Systems A-Frame Glass Cart 6 pages.
Imprimer la pageSmall A-Frame Glass Cart
Product Manual
Assembly
1. Unpack all materials in a clean and well lighted
work area. Please refer to component list table
for list of parts provided.
2. Place A-Frame cart ends on top of cart base as
shown below. Fasten in place with 3/8" x 3 1/2"
hex bolts, 3/8" flat washers and 3/8" nylon lock
nuts provided. Tighten the nuts on only finger
tight at this point.
3. Place cross members between A-Frame ends as
shown. Fasten in place to flatbar gussets using
3/8" x 1" hex bolts, 3/8" flat washers and 3/8"
Nylon lock nuts provided. Repeat for all 6 cross
member pieces.
4. Tighten all 3/8" fasteners put in place during
steps 3 and 4 using a 9/16" wrench and socket.
5. Take nylon ratchet strap and stretch to the
opposite A-Frame end of where the ratcheting
mechanism is attached. Wrap the hook around
the angle on the A-Frame end as shown.
6. Tighten nylon strap using the ratchet at the
opposite end of the hook on the nylon strap.
7. Your A-Frame cart is now ready to use.
Please continue reading this manual for
important operational safety information.
554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL 519-747-1856
720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL 763-249-7465