CommScope 1435971-1 Fiche d'instruction

Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} CommScope 1435971-1. CommScope 1435971-1 2 pages. 48-port straight patch panels

Imprimer la page

MRJ21 48–port straight patch panels are designed to

be mounted onto a standard 483–mm [19–in.]

Electronic Industries Alliance (EIA) rack or equipment

cabinet as shown in Figure 1. AMPTRAC patch panels

are designed for use with the

AMP NETCONNECT® AMPTRAC system. Read these

instructions thoroughly before starting installation.

AMPTRAC Retrofit Kit 1479951–1 can be installed onto

the standard patch panel to enable the patch panel to

be connected to the AMP NETCONNECT® AMPTRAC

system. Back Cable Manager Kits 1933352–[ ] must be

used to support the cable.

To obtain information on CommScope

http://www.commscope.com/SupportCenter/TechnicalSupport.aspx

AMP NETCONNECT®

products, visit our website at

Figure 1

Reasons for reissue of this instruction sheet are

provided in Section 6, REVISION SUMMARY.

Each 10/100BASE–T patch panel contains four

MRJ21 receptacles (one per 2 6 RJ45 connector

assembly), and each 10/100/1000BASE–T patch

panel contains eight MR21 receptacles (two per 2 6

RJ45 connector assembly). The ports are identified

by numbers printed on the front and on the back of

the patch panel. Four 12–24 screws are included to

mount the patch panel to the rack. In addition,

AMPTRAC patch panels have a sensor pc board

subassembly and two HDP–22 connectors to enable

the patch panel to connect to the

AMP NETCONNECT® AMPTRAC system.

9-JAN-17

Rev E

This product is covered by one or more U.S.

patents or their foreign equivalents. For patents, see